Due to test equipment limitations testing is limited to:
Test Condition 1: @ 2.9 – 3.2 GHz: Pulse Width 46 μs / Duty Cycle 0.01 max / Peak Op Power 3000 W (min) Test Condition 2: @ 2.8 GHz: Pulse Width 5 μs / Duty Cycle 0.001 / Peak Operating Power 50 KW (min)
Tr-tube
BTR2178 Specification TR (Plasma) Ceramic Input Window.
Passive / Reflective Protection
Characteristic | Min | Max | Units | Comments |
---|---|---|---|---|
Operational Frequency | 2.90 | 3.20 | GHz | |
Peak Fault Power | 50 | KW | 10 pulses at 46 μs max | |
Peak Normal Power | 10 | KW | ||
Duty Cycle | 4.5 | % | ||
Pulse Width | 46 | μsec | ||
Max Flat Leakage | 5 | W | (Pin = 0-50 W peak) | |
Flat Leakage Passive | 850 | mW | Normal Operating power | |
Spike Leakage Passive | 100 | W | 25 ns max spike width @ -3dB Input rise time >50 ns | |
Spike Leakage Energy Passive | 2500 | nJ | ||
Recovery Time (3 dB) | 30 | μs | Normal operating power or less | |
Insertion Loss | 0.5 | dB | Pin < 20 dBm @ 25 C | |
Return Loss | 16 | dB | Pin < 20 dBm | |
Operating Temperature | -40 | 50 | Degrees C | |
Storage Temperature | -55 | 50 | Degrees C | |
Humidity | 95% Condensing | |||
Temp Cycle | -55 | 85 | Degrees C | 5 Cycles (production test) |
In RF Connectors | WR284 ( 8 hole pattern acceptable) | |||
Out RF Connectors | WR284 ( 8 hole pattern acceptable) | |||
Pressure | 8 | 15 | psig | |
Radio Active Content | 30 | mCi | H3 (Tritium) | |
Design Operational Life | 1500 | hours | Test Condition #1 | |
Length | 3.02 (76.71) | Inches (mm) | Reference Outline | |
Width | 4.52 (114.81) | Inches (mm) | SKRR05231701 rev 4 | |
Height | Inches (mm) |